Repeat Cycle Timer – CS100 – ATC
The CS100 is a simple repeat cycle timer with T1 and T2 timers up to 25 seconds each, plus a third timer (T3) that extends the T1 time to a maximum of 50 seconds. The four front panel pushbuttons provide easy access to timer settings. A Reset input on the back of the unit allows multiple units to be synchronized.
The four SSR (Solid State Relay) outputs are configured as three SPDT (Single Pole Double Throw) and one SPST (Single Pole Single Throw). Relay outputs and control voltage initiate times have a maximum reset time of approximately 10 milliseconds.
The CS100 has a standard 15 terminal, plug-in round case, which is designed to minimize down time during replacement. The CS100 is quickly & easily removed from the front. A replacement timer can be plugged into the existing housing, eliminating the need for rewiring. The CS100 can also be panel mounted in a 3.19″ round cutout.
- Selectable T1 & T2 Times
- Simple Front Panel Setup
- Rugged, SPDT Solid-state Relay Outputs
- Reset Input Synchronizes Multiple Units
- Standard 15 Terminal Plug-In Round Case
- Panel Mounts in Switchboard Housing or 3.19″ Cutout
- Easily Replaces Round Case Eagle Timers