Pyragon Loop Isolator

Description

The 10AI Loop Isolators are a good solution for solving ground loop problems in a process environment. Each isolator is powered in a different way. This gives the user many options to come up with the best ground loop elimination solution.

  • Signal Powered CMOS Circuitry
  • Precise Duplication of Input Signals
  • 4–20 or 10–50 mA, Same Unit
  • High Common Mode Rejection
  • 1500 VRMS Isolation
  • Mounts on Bulkhead or in 3″ Conduit Box

Provides the Necessary Signal Isolation for Noisy Process Circuits
If your process signals are influenced by ground loops, high common mode noise, or other interference, you need the Transmation Model 10 Auto-Isolator. Requiring no separate power supply, Auto-Isolator operates efficiently from input signal current, and precisely retransmits the current applied to the input with an accuracy of ±0.1% of span.

Usable with milliamp signal ranges of 4–20, 10–50, or other ranges between 4 and 50 mA. The instrument can be bulkhead-mounted or installed in a 3-inch cast conduit box. A trim potentioMeter, accessible through the instrument’s top plate, permits precise adjustment of current transfer as a function of load resistance up to 500 ohms at 20 mA, and 250 ohms at 50 mA.

Catalog-Page-86                                         Pyragon-Model 10-DS

 

Clear

products found
Item # Description Price
10AIModel 10 Auto-Isolator$295.00
Sorry, no products were found fitting that criteria. Please widen your search or reset item filters now