440.238.2550   /   800.557.0064   /   sales@weschler.com
analog meters, digital meters, transducers, signal conditioners, data loggers and test instrumentation
Home | About Us | What's New | Industries | Weschler Products | All Products | Meter Mod Center | Reference | Contact | Site

What's New
Return to List

Measurement & Control News Oct 2015

alt-tag
   
   
Measurement & Control News  
   
   
In this issue:   Insulation Resistance Testers
  Loop Splitter
 

 


Insulation Testers

 
   

Use an Insulation Resistance Tester (MegOhmMeter) to check insulation on cables, transformers, motors and electrical equipment.  A variety of portable and handheld models are available, with test voltages to 15kV.  Select a modern digital/bar display or a traditional analog meter.  Use the tester stand-alone or save results and download data to a PC for archiving or analysis. We carry well-known brands including Megger, AEMC, Fluke, Extech, Hioki and Yokogawa.  Also leakage and hi-pot testers.

 
MegOhmMeters  
Leakage Testers  

 


Loop Splitter

 
   
 
 
   

The Laurel QLS Quad Loop Splitter sources four separate 4-20mA outputs from a single input. Outputs can have the same ground or grounds differing by up to ±10V.  Benefits of a loop splitter include:
Load devices can share a common ground.
Each loop drives a single load, which reduces voltage compliance problems.
If one loop opens, other loops continue to operate.
Each loop can be adjusted to compensate for device inaccuracy.
The QLS is DIN rail mounted & ac or dc powered. A yellow LED for each output shows brightness proportional to output level. The front panel also has zero & span adjustments and a loop current test point for each channel. 

 
QLS Info  
More Transmitters  

 

Visit weschler.com for information on:
Analog Meters | Digital Meters | Bargraph Meters
  Sensors | Transducers | Signal Conditioners
  Controllers | Recorders | Test Equipment